Eduroam configuration for Windows 7
en: Eduroam configuration for Windows 7
How to setup eduroam on windows 7
1. Be certain your wireless connection is activated/enabled
2. Right click the wireless network symbol in the bottom right hand corner of your screen and choose "Open Network and sharing Center" ( The wireless network symbol look similar to a flight of stairs, a red x over the symbol means your wireless nettwork card is switched off).
3. Choose the alternative "Set up a new connection or network"
4. Choose "Manually connect to a wireless network"
5. Check that the configuration information matches the information in hte screenshot below. Choose "Next"
Fil: Informasjon om trådløs tilkobling.png
6. Choose "change connection properties"
7. A new dialog box appears with two window pane choices, "Connection" and "Security". Click on the secuirty windows pane and check that the configuration information matches the information in the screenshot below
8. Fill out the information as shown below (Do not click on the choice for "Addtrust External CA Root")
File:W7sertifikat no server NO.png
Fil:Fjern-brukernavn og passord.png
9. Click OK twice to get back to the first security pane and choose the button "Advanced settings"
10. Select "" and "user " in the pull down menu then click "OK" twice
11. Right click again the wireless network symbol in the bottom right hand corner of your screen
12. Choose "eduroam"
13. Choose "Connect to"
14. Insert your username (username@uib.no) and password (if your password contains special characters you may have trouble connecting to eduroam, visit sebra.uib.no to change your password)
(Dersom passordet inneholder spesialtegn kan det hende du ikke får koblet til Eduroam, gå da inn på sebra.uib.no for å endre passord.)
15. Du skal nå være tilkoblet eduroam. Dersom du har problemer med å koble til eduroam etter nedleggingen av det gamle UIB-nettverket, kan du følge de neste stegene. You should now be connected to eduroam.
