Eduroam configuration for Windows 7: Difference between revisions

From IThelp
No edit summary
(added category: Eduroam)
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[en: Eduroam configuration for Windows 7]]
[[no:Eduroam Windows 7]]


== How to setup eduroam on windows 7 ==
== How to setup eduroam on windows 7 ==
Line 6: Line 6:


1. Be certain your wireless connection is activated/enabled
1. Be certain your wireless connection is activated/enabled


2. Right click  the wireless network symbol in the bottom right hand corner of your screen and choose "Open Network and sharing Center" ( The wireless network symbol look similar to a flight of stairs, a red x over the symbol means your wireless nettwork card is switched off).  
2. Right click  the wireless network symbol in the bottom right hand corner of your screen and choose "Open Network and sharing Center" ( The wireless network symbol look similar to a flight of stairs, a red x over the symbol means your wireless nettwork card is switched off).  


3. Choose the alternative "Set up a new connection or network"
[[File:networksymbol1.png|400px]]


4. Choose "Manually connect to a wireless network"


5. Check that the configuration information matches the information in hte screenshot below. Choose "Next"
3. Choose the alternative "Set up a new connection or network"


[[File:networkandsharingcenter.png]]


[[Fil: Informasjon om trådløs tilkobling.png]]


4. Choose "Manually connect to a wireless network"


6. Choose "change connection properties"
[[File:setupaconnectionornetwork.png|400px]]


7. A new dialog box appears with two window pane choices, "Connection" and "Security". Click on the secuirty windows pane and check that the configuration information matches the information in the screenshot below


[[Fil:eduroamegenskaper.jpg]]
5. Check that the configuration information matches the information in the screenshot below. Choose "Next"


[[File:step5.png|400px]]




8. Fill out the information as shown below (Do not click on the choice for "Addtrust External CA Root")
6. Choose "change connection properties"


7. A new dialog box appears with two window tabs, "Connection" and "Security". Click on the secuirty tab and check that the configuration information matches the information in the screenshot below


[[File:step7.png|400px]]




[[File:w7sertifikat_no_server_NO.png]]




[[Fil:Select auth Method.png]]
8. Fill out the information as shown below (Do not click on the choice for "Addtrust External CA Root")


[[File:step8.png|400px]]


[[Fil:Fjern-brukernavn og passord.png]]


9. Click OK twice to get back to the first security pane and choose the button "Advanced settings"
8.1 Select the button "Configure" next to "Secured password (EAP-MSCHAP v2)"


[[File:step8.1.png|400px]]


[[File:w7_eduroam_sec_NO.png]]


8.2 Turn off automatically using Windows username and password


[[File:step8.22.png|400px]]


10. Select "" and "user " in the pull down menu then click "OK" twice




[[File:w7pkt8_NO.png]]
9. Click OK twice to get back to the first security tab and choose the button "Advanced settings"


[[File:step9.png|400px]]


11.  Right click again the wireless network symbol in the bottom right hand corner of your screen


12.  Choose "eduroam"


13. Choose "Connect to"
10. Check option "Specify authentication mode:" and choose "user authentication" in the pull down menu then click "OK" twice


[[File:step 10.png|400px]]


[[Fil:traadloesegenskaper.jpg]]


11. To choose eduroam after you're finished with the confiuration steps, as shown above, right click again the wireless network symbol in the bottom right hand corner of your screen


[[File:networksymbol1.png|400px]]


[[File:step 11.png|400px]]


14. Skriv inn '''DittEgetBrukernavn@uib.no''' og '''passord''' . Insert your username (username@uib.no) and password (if your password contains special characters you may have trouble connecting to eduroam, visit sebra.uib.no to change your password)
12Choose "eduroam"
(Dersom passordet inneholder spesialtegn kan det hende du ikke får koblet til Eduroam, gå da inn på sebra.uib.no for å endre passord.)


13.  Choose "Connect to"




[[File:Brukernavnpassord.jpg|400px]]
14. Insert your username ('''username@uib.no''') and password (if your password contains special characters you may have trouble connecting to eduroam, visit sebra.uib.no to change your password)


[[File:step14.jpg|400px]]






15. Du skal nå være tilkoblet '''eduroam'''. Dersom du har problemer med å koble til eduroam etter nedleggingen av det gamle UIB-nettverket, kan du følge de neste stegene.  You should now be connected to eduroam.  
15. You should now be connected to eduroam.  




Line 83: Line 89:




[[Kategori:Windows]]
[[Category:Windows]]
[[Kategori:Bruksanvisninger]]
[[Category:User guides]]
[[Category:Eduroam]]

Latest revision as of 15:58, 15 December 2017


How to setup eduroam on windows 7

1. Be certain your wireless connection is activated/enabled


2. Right click the wireless network symbol in the bottom right hand corner of your screen and choose "Open Network and sharing Center" ( The wireless network symbol look similar to a flight of stairs, a red x over the symbol means your wireless nettwork card is switched off).

Networksymbol1.png


3. Choose the alternative "Set up a new connection or network"

Networkandsharingcenter.png


4. Choose "Manually connect to a wireless network"

Setupaconnectionornetwork.png


5. Check that the configuration information matches the information in the screenshot below. Choose "Next"

Step5.png


6. Choose "change connection properties"

7. A new dialog box appears with two window tabs, "Connection" and "Security". Click on the secuirty tab and check that the configuration information matches the information in the screenshot below

Step7.png



8. Fill out the information as shown below (Do not click on the choice for "Addtrust External CA Root")

Step8.png


8.1 Select the button "Configure" next to "Secured password (EAP-MSCHAP v2)"

Step8.1.png


8.2 Turn off automatically using Windows username and password

Step8.22.png


9. Click OK twice to get back to the first security tab and choose the button "Advanced settings"

Step9.png


10. Check option "Specify authentication mode:" and choose "user authentication" in the pull down menu then click "OK" twice

Step 10.png


11. To choose eduroam after you're finished with the confiuration steps, as shown above, right click again the wireless network symbol in the bottom right hand corner of your screen

Networksymbol1.png

Step 11.png

12. Choose "eduroam"

13. Choose "Connect to"


14. Insert your username (username@uib.no) and password (if your password contains special characters you may have trouble connecting to eduroam, visit sebra.uib.no to change your password)

Step14.jpg


15. You should now be connected to eduroam.